SUPERLATH
ROLLER SHUTTERS
Roller Curtain
The shutter curtain is constructed from 75mm or 100mm twin interlocking cold rolled galvanized steel laths, onfilled with CFC insulation.. Each lath is retained by nylon endlocks fixed and secured by steel rivets. The bottom lath incorporates a rubber seal.
read more
Superlath Roller Shutters
INDUSTRIAL INSULATED
STEEL ROLLER SHUTTERS
Profile Specification
Unlike conventional insulated steel shutters which comprise of two low grade single skin sections with poorly fitting polystyrene in-fill, the S77 is a double skin profile roll-formed from a single pre-coloured steel section with a hot injection polyurethane central core which bonds to the internal face of the section giving additional strength and rigidity.
read more
Industrial Insulated Steel Roller Shutters

TUBE MOTOR
ROLLER SHUTTERS
Perforated Curtain
Manufactured from 22g or 20g pre galvanised steel section perforated to allow 30% light transmission and rolled to suit a curved lath profile of nominal 75mm and flat lath profile of 50mm. Each interlocked to form continuous curtains fully secured by either steel or nylon endlocks for maintenance free movement. We recommend the curtain be either plastisol HP200 coated or powder coated.
read more
Tube Motor Roller Shutters
STEEL
ROLLER SHUTTERS
Galvanised Finish
Personnel Wicket Gate

This curtain is constructed of 76mm (3") interlocking curley lath, galvanised to SS 2989. The thickness of lath is 18 swg (doors of width above 5.0 metres). 20swg (3.5m to 5.0m) and 22swg (3.50). Finished with a T' section bottom rail galvanised.
read more
Steel Roller Shutters